Now that I actually have a media streamer, I need to start archiving the disks I have legally purchased and wish to rip for frequent viewing on my own equipment.
So who rips stuff? What do you use?
Don't just say "doom9.org" because every method they talk about involves 4 different programs and 6 steps. There HAS to be an easier way to do this. I am willing to pay for a good program.
Making backups of DVD's and Blu Ray's.
From what I've heard second-hand, Winblows is ... difficult when it comes to this sort of shyte. Every vid that's ever been burned to CD/DVD/Blu-ray for me has been done on some version of Linux.
Diogenes of Sinope: "It is not that I am mad, it is only that my head is different from yours."
Arnold Judas Rimmer, BSC, SSC: "Better dead than smeg."
Arnold Judas Rimmer, BSC, SSC: "Better dead than smeg."
On doom9.org, there is dvdfab. dvdfab even has a DVD to PS3 option. Along with to AVI and many others.
I'm surprised you didn't notice it.
It's not free. But, you said you're willing to pay. But, it's free for a little while. So, if you just get to it and rip them all, then, you're set. Each PC you load it on will of course have it's own trial period.
Until DVDfab 6 came out, turning my movies into an AVI for my wife's Arcos was a 5 step process that would run over night. DVDfab 6 put it all into one utility, but, it's expensive. I did a handfull of movies for her and then it expired.
Oh, and I love the "Remove annoying PGC's...." option.
Edited By Cakedaddy on 1259035878
I'm surprised you didn't notice it.
DVDFab HD Decrypter - simple ripper that's always updated to handle copy protection by disc corruption mechanisms.
It's not free. But, you said you're willing to pay. But, it's free for a little while. So, if you just get to it and rip them all, then, you're set. Each PC you load it on will of course have it's own trial period.
Until DVDfab 6 came out, turning my movies into an AVI for my wife's Arcos was a 5 step process that would run over night. DVDfab 6 put it all into one utility, but, it's expensive. I did a handfull of movies for her and then it expired.
Oh, and I love the "Remove annoying PGC's...." option.
Edited By Cakedaddy on 1259035878
So you say YOU have used this, and have been able to make perfect rips onto a hard drive? I don't know what an Arcos is.Cakedaddy wrote:It's not free. But, you said you're willing to pay. But, it's free for a little while. So, if you just get to it and rip them all, then, you're set. Each PC you load it on will of course have it's own trial period.DVDFab HD Decrypter - simple ripper that's always updated to handle copy protection by disc corruption mechanisms.
Until DVDfab 6 came out, turning my movies into an AVI for my wife's Arcos was a 5 step process that would run over night. DVDfab 6 put it all into one utility, but, it's expensive. I did a handfull of movies for her and then it expired.
Oh, and I love the "Remove annoying PGC's...." option.
Plus I will require some tech support, it sounds like you have done this more than I. If you say it works I will just buy the whole package for 20% off.
"Be bold, and mighty forces will come to your aid."
Download it. Push some buttons, and see what comes out. It's really easy. You'll be able to guess your way to what you want. But, you can try all of it before you buy it so you know it will work for you.
An Archos is a media player. It's like an MP3 player for movies. 7" screen and a big hard drive for movie storage. So, I would rip the movie into an AVI (that I would move to my laptop for veiwing) and then the Archos software would move it to her device. She likes subtitles, so I ripped hers with subtitles included. I wanna say you could control the compression as well. I'd make the movies about 700MB in size. On a 7" screen, you pretty much don't notice the resolution loss. They even looked pretty good on the 17" laptop screen. Point is, you can fit a whole lotta movies on a smaller harddrive.
An Archos is a media player. It's like an MP3 player for movies. 7" screen and a big hard drive for movie storage. So, I would rip the movie into an AVI (that I would move to my laptop for veiwing) and then the Archos software would move it to her device. She likes subtitles, so I ripped hers with subtitles included. I wanna say you could control the compression as well. I'd make the movies about 700MB in size. On a 7" screen, you pretty much don't notice the resolution loss. They even looked pretty good on the 17" laptop screen. Point is, you can fit a whole lotta movies on a smaller harddrive.
I put in one of my Buffy the Vampire Slayer disks to see how it does pulling out a single episode. This program scanned it.
"This disk contains CSS protection, this version of DVDFab cannot copy it."
Not really impressed, this is an old disk. Because it is the demo version? How the hell do I test it if it wont do anything?
Edited By GORDON on 1259115014
"This disk contains CSS protection, this version of DVDFab cannot copy it."
Not really impressed, this is an old disk. Because it is the demo version? How the hell do I test it if it wont do anything?
Edited By GORDON on 1259115014
"Be bold, and mighty forces will come to your aid."
Ok, new question:
It looks like with this program it is easy to rip the DVDs into AUDIO_TS and a VIDEO_TS folders... I've seen that lots as part of the ripping process... I just don't know what to do with them at that point. The folders I made of this one episode are almost 2gb big, which is weird because it is one episode of a DVD with 4 episodes on it.
Here's what I'd like to do: Make a 720P version of this 50 minute TV episode, from the DVD. Before you say NOT POSSIBLE, I DL'd a 720P version of Dr. Horrible's Sing-a-long Blog, and it was only released on DVD. So SOMEONE managed to do it, and it looks and sounds perfect. That's what I want. This 293MB .mkv file I just made of this episode looks and sounds approximately like VHS quality.
The 751MB .mkv file of Dr. Horrible, which is about 40 minutes long, is perfect.
It looks like with this program it is easy to rip the DVDs into AUDIO_TS and a VIDEO_TS folders... I've seen that lots as part of the ripping process... I just don't know what to do with them at that point. The folders I made of this one episode are almost 2gb big, which is weird because it is one episode of a DVD with 4 episodes on it.
Here's what I'd like to do: Make a 720P version of this 50 minute TV episode, from the DVD. Before you say NOT POSSIBLE, I DL'd a 720P version of Dr. Horrible's Sing-a-long Blog, and it was only released on DVD. So SOMEONE managed to do it, and it looks and sounds perfect. That's what I want. This 293MB .mkv file I just made of this episode looks and sounds approximately like VHS quality.
The 751MB .mkv file of Dr. Horrible, which is about 40 minutes long, is perfect.
"Be bold, and mighty forces will come to your aid."
I dunno. Quickly looking at the options, I don't see a 720P, 1080i, etc type option. You can set the frame size. You can check/uncheck a 'deinterlacing' option. You can set a bunch of bandwidth options. I don't know enough about 720P to know which options make 720P.
I knew the screen size of the Arcos (like 720 x 480 or something). I would then look at the original aspect ratio for the video. Find the clostest match in the list that was no wider or taller than the Arcos resolution. That kept the aspect ratio correct and wasn't any bigger/smaller than the video player's capabilities.
I knew the screen size of the Arcos (like 720 x 480 or something). I would then look at the original aspect ratio for the video. Find the clostest match in the list that was no wider or taller than the Arcos resolution. That kept the aspect ratio correct and wasn't any bigger/smaller than the video player's capabilities.
MKV is a container filetype for holding audio and video. It's all the rage among the illegal ripping crowd.Cakedaddy wrote:What is .mkv?
I've only done avi and dvd to dvd. The AUDIO and VIDEO folders are copies of what's on the DVD.
It's not me, it's someone else.
Because you made me look. . . I'm working on some more conversions for the Archos. My VERY expired version of DVDfab still works too. Not sure what expires. . . Anyway, as a refresher to how I did it (I don't remember the details), I hit the Archos forums to see what was the easiest way for our device. Many people were talking about FairUse Wizard. So, I'm trying this now. Seem similar to DVDfab in capabilities. Has a BOB Deinterlace options (anything to do with the i or p in res numbers? Dunno.) But, I'm trying FU (as they call it) to make my AVIs. The free version has a file size limit of 700MB, which works for me (remember, I compress pretty heavy cause of the 7" screen). The full version allows more features and bigger files. One feature I liked was that you could pick when it starts and stops. So, I could skip all the open credits (if there's nothing happening) and keep the closing credits out as well to make the movie a bit smaller. You can also tell it when the closing credits start, if you want to keep them, but it increased the compression rate cause quality is less important, thus, saving space. It did more stuff too. But, so did DVDfab. Not sure what it all means.
Edited By Cakedaddy on 1259183861
Edited By Cakedaddy on 1259183861