Finishing my basement

For stuff that is general.
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

The lack of construction progress for the last year... aside from the times when I was on an extended project... was because, for the most part, this space station is fully armed and operational.

Image

Got the big TV, the surround sound speakers, and the couch where "my spot" has my eyeballs are centered exactly 8'6" from a 60" screen. It is perfect. The TV was recycled from upstairs but the receiver and speakers cost a few shekels, as did the big couch, so that was the construction budget, for a while.

Image

So, it is functioning as a complete media room, it just aint 100% yet. The bins and shit are full of books that are going on the final shelves, and there will be a proper area for the electronics.
"Be bold, and mighty forces will come to your aid."
Vince
Posts: 8625
Joined: Thu May 20, 2004 10:00 pm
Location: In bed with your mom

Post by Vince »

Looks good!
"... and then I was forced to walk the Trail of Tears." - Elizabeth Warren
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

GORDON wrote:Image
Bought the wood for this and the bookshelves.

Spent: $200
Running total: $3202.

Seems that the high-end furniture you buy in the store has you paying about 15% for actual materials and 85% for labor/overhead.
"Be bold, and mighty forces will come to your aid."
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

This is 95% of the wood that is going to build the above sketch, only the backing and trim is not shown. Cut and ready to assemble. The wood for the other shelves as partially cut to size - my wall is a little goofy so we need to scribe some things so it fits correctly. We will be putting it all together this weekend, most likely.

Image
"Be bold, and mighty forces will come to your aid."
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

Here's what I was doing today.

Entertainment center, this is the bit to the side that will house the components. Bottom shelf is adjustable, thus the holes. I may put some vinyl albums there. Maybe not. We'll see.
Image

Image

This is the bit the TV will sit on. It is getting another layer of 3/4" wood on top, so it will be sturdier than it looks here. Adjustable shelf in the middle.
Image

This is showing a false back to that cabinet... I can tie up all the cables from all the entertainment center back there, then have a nice panel to hide all of them. Should see zero wiring from the front.
Image

Will spend a good chunk of tomorrow doing more.




Edited By GORDON on 1394930541
"Be bold, and mighty forces will come to your aid."
TheCatt
Site Admin
Posts: 58738
Joined: Thu May 20, 2004 11:15 pm
Location: Cary, NC

Post by TheCatt »

Where do the 8 tracks fit?
It's not me, it's someone else.
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

Two answers, pick one:

1. Adjustable shelves... I can make them fit. Also, I have an 8-track to go on the shelves...

2. Up your butt.
"Be bold, and mighty forces will come to your aid."
TPRJones
Posts: 13418
Joined: Fri May 21, 2004 2:05 pm
Location: Houston
Contact:

Post by TPRJones »

Given your predilection towards outdated media, I'm guessing #1.
"ATTENTION: Customers browsing porn must hold magazines with both hands at all times!"
User avatar
Cakedaddy
Posts: 9480
Joined: Thu May 20, 2004 6:52 pm

Post by Cakedaddy »

I have Beta vcr if you want it.
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

Today's progress:

From my imagination to paper to an actual thing. Neat. The bit in the middle with no bottom shelf is where the subwoofer will sit.

Image

Preparing the dadoes for the bookshelf uprights.

Image

Our joints, dry fitted, pre-glued.

Image

Image

Here's what they look like all glued and clamped and drying. I designed these with open backs because too much of my awesome blue walls were getting covered up. Now you can see my walls through the shelves.

Image

Bought some more trim and odds and ends. SHOULD be the final cash outlay.... but it seems like there is always something I forgot.


Spent: $65
Running total: $3267.

I actually have a few boards to return.... I'll adjust the running total when I actually return them.
"Be bold, and mighty forces will come to your aid."
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

Quick update:

Everything is built and I am in the process of applying stain and poly. I realized that unlike last time, the basement is now full of cushiony furniture, and doing stain and poly is a very stinky process. As I don't want that smell soaking into the furniture, I am doing the finishing out in my frozen, wet-ass garage. It isn't pleasant, but at least I aint stinking the house up. Should have shit moved into the basement sometime this week.
"Be bold, and mighty forces will come to your aid."
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

Just returned some stuff I bought and didn't need.

Spent: $-35
Running total: $3232.

Hoping to have an install day this weekend when everything gets moved from the garage and nailed to the walls of the basement. Then there are a few touch ups of stain here and there, and a few pieces of baseboard to cut and place, then the basement is fucking done, man.
"Be bold, and mighty forces will come to your aid."
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

Got some catching up to do with my pics.

Here's when we finished the final shelves in the workshop a couple weeks ago.

Image
"Be bold, and mighty forces will come to your aid."
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

Here's where I was pre-staining the trim prior to nailing it to the furniture. I decided to go with 2 colors, so I did the trim separately from the rest so it could be nailed together already 2 different colors.

Image
"Be bold, and mighty forces will come to your aid."
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

This is when I was transporting the cabinets from my buddy's house to home, and had to stop for gas, and realized I left the drawer rails sitting up on the side of the truck. Good thing I was going slow to minimize jostling.

Image
"Be bold, and mighty forces will come to your aid."
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

Spent about 10 days staining everything in my cold, wet, flooded, frozen-ass garage, and started bringing stuff down to the basement.

Image

Image

What's interesting is that I built that wall all fucked up. There is a negative slope of about 2 inches from ceiling to floor, and the slope isn't even consistent from right to left. There's less slope the farther left you go. So, I measured the rate of slope, and my carpenter buddy built everything so even after it was flush against the wall, the facing side would still be level up and down. The bottom of those shelves are about 12.5" deep, and the tops are about 11" deep. And the front face....

Perfect.

Image

Image
"Be bold, and mighty forces will come to your aid."
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

And I started putting together the entertainment center part. Was a real bitch getting all the pieces level when the floor has a subtle slope.

Image

Trim pieces glued and nailed. Buddy brought over his pneumatic nailer... MUCH easier that hammer and nails when working with trim.

Image

Shims everywhere in that part.

Image

A little touch-up stain where I had to cut things to measure, one more coat of poly, a day to dry, and shit will be on the shelves.
Image

There is still a drawer to be built, a few pieces of baseboard now that the cabinets are in place, and a door to the room. I'd call this project 92% done.
"Be bold, and mighty forces will come to your aid."
GORDON
Site Admin
Posts: 56735
Joined: Sun Jun 06, 2004 10:43 pm
Location: DTManistan
Contact:

Post by GORDON »

This is under the TV, the cabinet with the false back to hide all the wires. Got them tied up all nice and neat, separating the low voltage from the high in order to reduce interference.

Image

The false back.

Image

And the adjustable shelf.

Image

This is the subwoofer alcove, there's going to be a shelf that hides those wires.

Image

This is the component cabinet on the right, where there isn't a false back. I probably should have built one in, I didn't anticipate as many power lines running through there.

Image

With the adjustable shelf... currently set to make room for LPs down there. That may not be permanent. Don't know.

Image


So I went from this:

Image

To this. Neat.

Image
"Be bold, and mighty forces will come to your aid."
Malcolm
Posts: 32040
Joined: Fri May 21, 2004 1:04 pm
Location: Minneapolis

Post by Malcolm »

You have a massive streak of shit all over your TV in that last shot.
Diogenes of Sinope: "It is not that I am mad, it is only that my head is different from yours."
Arnold Judas Rimmer, BSC, SSC: "Better dead than smeg."
Post Reply